Foremost Buildings, Inc.

895 N Parkway Street Jefferson WI 53549
Phone: (920) 674-6746 Fax: (920) 674-9888
Email:support@foremostbuildings.com

Frame Profiles

 

 

Frame Profiles

taperedbeam
Tapered beam framing consists of strauight columns and a tapered rafter. When combined with optional inset girts, maximum usable space is provided. This framing type is economical for clear spans up to 60 feet.

 

rigidframeRigid frames are composed of tapered, or optional straight columns and tapered beams. Rigid frame deasign is is excellent for heavy loadings like cranes and for large clear spans up to beyond 150 feet.

 

 

modularspanrigidframeThese are of rigid frame design with interior columns for economy in wide buildings from 80 feet to 400 feet and wider. Interior spans vary as needed. Straight columns are also available with this framing system.

 

 

singleslopedrigidframeSingle sloped rigid frames provide many of the advantages of rigid frames, but are designed to slope to one side. This can provide a flat-roof appearance from the high sidewall and sheds water to one side only.

 

 

modularspansingleslopedrigidframeFor wide buildings, where site conditions dictate roof water flow in one direction or when a flat-roof appearance from the high sidewall is desired, this framing system is an economical solution.

 

 

 

leantoA lean-to frame is a single sloped member that relies on support from another frame at the high side. Lean-tos can be attached to the host frame at the eave, as shown, or below eave.

 

 

 

BACK TO DESIGN CENTER